Replacing Your Bug Zapper Globe

From gpu
Revision as of 04:17, 3 September 2025 by VetaPerron1 (talk | contribs) (Created page with "<br>Please scroll all the way down to find your bug zapper by model name and model sort and observe our directions on the right way to change your bug zapper globe. At no time are you ever to take away the hood or cage of the bug zapper to exchange the globe. This can then permit access to stay parts and void warranty. Which is your Bug Zapper? Click the links below to search out the directions for that particular bug zapper. 1. Unplug your Bug Vac and take away from its...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Please scroll all the way down to find your bug zapper by model name and model sort and observe our directions on the right way to change your bug zapper globe. At no time are you ever to take away the hood or cage of the bug zapper to exchange the globe. This can then permit access to stay parts and void warranty. Which is your Bug Zapper? Click the links below to search out the directions for that particular bug zapper. 1. Unplug your Bug Vac and take away from its mounting place. 2. Resting your Bug Vac on a gentle floor remove the water draw from the trap. 3. Remove the lens by locating the gap at the bottom of the lens in the centre, Defender by Zap Zone use your fore finger and thumb to squeeze the empty drawer holder collectively and thoroughly slide a skinny steel object. 4. Gently angle the thing behind the lens to boost the centre and release the left tab by sliding the lens to the suitable.



Repeat by sliding the lens to the left to launch the right tab. 5. Twist the globe to open the lamp holder to remove the lamp. 7. Twist the new globe into place to shut the lamp holder. 8. Replace the lens by inserting the left tab into its corresponding gap and repeat with the right tab. 9. Secure the lens by pushing it downwards, you will really feel it click on into place. 10. Replace the drawer full of water and several other drops of detergent. 11. Plug your bug zapper into the facility socket and the globe should mild up. Following steps 1-5 check the globe is secure in the lamp holder and substitute plastic cover. Use real yard guard substitute lamps in your bug zapper. When you have followed these steps and your zapper still won’t mild up, please contact us. 2. Holding your bug zapper, turn it the wrong way up so the hood is facing away from you.



3. Access the sunshine by locating the lever within the centre of the bug zapper and pull together with your finger in the direction of you. 4. The bulb cover will open and Zap Zone Defender Experience you will be capable of access the alternative globe. 5. Gently pull on the globe to remove it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and secure by once more pulling the lever in the direction of you after which releasing once the cowl has closed securely. 9. Plug your bug zapper into the facility socket and the globe should gentle up. Following steps 1-4 test the globe is safe in the lamp holder and Official Zap Zone Defender change plastic cowl. You probably have adopted these steps and your zapper still won’t gentle up, please contact us. 2. Holding your bug zapper, Zone Defender flip it upside down so the hood is dealing with away from you. 3. Access the sunshine by locating the lever in the centre of the bug zapper and pull along with your finger in direction of you.



4. The bulb cowl will open and you will be able to access the replacement globe. 5. Gently pull at the globe to take away it from the lamp holder. 8. Replace plastic cowl on the underside of the bug zapper and safe by again pulling the lever in the direction of you after which releasing once the cover has closed securely. 9. Plug your bug zapper into the power socket and ZapZone Defender the globe should mild up. Following steps 1-four check the globe is safe within the lamp holder and Zap Zone Defender Device substitute plastic cover. You probably have adopted these steps and your zapper still won’t light up, please contact us. 2. Holding your bug zapper, ZapZone Defender turn it the other way up so the hood is dealing with away from you. 3. Using a phillips head screwdriver take away the 2-3 screws situated on the underside of the bug zapper. 4. Remove the plastic cowl sealing the bug zapper globe in place.