This figure shows the pinout of 68-pin B Series and E Series devices. The following B Series and E Series devices use this pinout:
|
|
|
|
If you are using the R6850 or SH6850 cable assemblies with 68-pin E Series devices, refer to the 50-Pin MIO pinout.
![]() |
Note Further documentation for the B Series devices is located in the E Series Help. |
![]() |
Note Some hardware accessories may not yet reflect the revised terminal names. If you are using an E Series device in Traditional NI-DAQ (Legacy), refer to the Terminal Name Equivalents table for information on Traditional NI-DAQ (Legacy) signal names. |
|
1 No connects appear on pins 20 through 22 of devices that do not support AO or use an external reference. |